BPS C-100 CPAP Guia do Utilizador descarregar pdf (Página 14)

Powering Your PAP Device: Introduction

The C-100 Battery Pack will work with most makes and models of PAP

devices; however, the DC capability, voltage requirements and plug polarity

of the device will determine how it connects to the Battery Pack.

Some PAP devices can be connected directly to the Battery Pack via the

DC power pigtail cord; while others will require the additional use of a

power converter or power inverter in order to complete the connection

between the Battery Pack and the PAP device.

The following pages provide specific instructions for how to connect

the Battery Pack to Philips Respironics, ResMed, Fisher & Paykel, and

DeVilbiss PAP devices.

DO NOT attempt to connect the Battery Pack to a PAP device until

you have read and understand these connection instructions. Failure

to do so may damage the PAP device.

Powering Your PAP Device: Connector Tips

The C-100 Battery Pack kit comes with several different connector tips.

These tips are designed to fit many types of devices that offer DC capability.

If the PAP device can be connected directly to the Battery Pack, as with

Respironics and DeVilbiss PAP devices, one of the connector tips will need

to be used in order to connect the PAP device to the Battery Pack.

DETERMINING THE APPROPRIATE CONNECTOR TIP

 Begin by comparing the connector tips provided with the Battery Pack

kit to the tip of the AC power supply of the PAP device. Choose the

connector tip that most closely matches.

 Locate the DC input port on the PAP device and try to insert the

chosen connector tip. The connector tip should insert easily and should

not be forced into place.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 27 28

Sem comentários

BPS C-100 CPAP Guia do Utilizador Página 14